03-31-2022 08:08 AM
Hi Experts ,
We could see high CRC errors on one of the interface, So we would like to check if the cable is faulty ? Can we do any test from APIC on the interface ?
similar test as below which we do on Catalyst switches , Is any command available in LAEF switch CLI or on GUI ?
Test cable-diagnostics tdr interface gi1/0/2
Show cable-diagnostics tdr interface gi1/0/2
03-31-2022 02:45 PM
What media is this link? Copper or Fibre Optic?
04-01-2022 04:23 AM
Fiber Optics .
Transceiver Type : 10Gbase-SR
Transceiver Name : CISCO-FINISAR
04-01-2022 04:35 AM
@Network_Sarovani wrote:
Fiber Optics .
Catalyst switches cannot perform OTDR test.
04-01-2022 08:14 AM
Catalyst or Nexus ACI switches ???
04-01-2022 04:54 PM
I do not believe no Cisco product, Catalyst, Nexus, MDS, etc., can do OTDR.
04-03-2022 11:49 PM
on Catalyst switches we can test the cable from below command ,
Test cable-diagnostics tdr interface gi1/0/2
Show cable-diagnostics tdr interface gi1/0/2
04-04-2022 12:11 AM
Look at the command and it specifies it: TDR.
Fibre Optic is OTDR.
04-05-2022 11:36 PM - edited 04-05-2022 11:36 PM
There are no tests available, other then verifying the TX/RX power, directly on the leaf:
show interface eX/Y transceiver details
Stay safe,
Sergiu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide