cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
826
Views
0
Helpful
0
Replies

EP to Ext IP Atomic counters show 50% drop

For test purposes, I have set up EP to Ext IP Atomic Counters. Surprisingly, the operational statistics show 50% packet drop, which absolutelly does not seem relevant.

- The ACI endpoint 10.50.6.100 is of type L3 and it is a single port (no port-channel) physical device directly attached to the ACI Fabric.

- The Ext IP endpoint is 10.48.62.106 is a remote server reachable via L3OUT from the Tenant, where the ACI endpoint also resides.

- To generate some traffic, I have connected to the ACI Endpoint from the server via SSH and did some config listing.

- When using ICMP to test reachability of the EP from the server, no ping get's lost and also the SSH session runs without any issues.

- Atomic counters show exactly 50% drop and it coresponds to Total Admitted and Dropped packet count.

 

 

 Any explanation for this?

Please see the attached screen capture from the ACI GUI.

 

Regards,

Alexander

0 Replies 0

Review Cisco Networking for a $25 gift card

Save 25% on Day-2 Operations Add-On License