PIM-Sparse Mode in Cisco ACI

[netbeginner]

Hi All, 

Which L3out mode (Routed, Sub-Interface , SVI) supports PIM-SM for multicasting and what is the limitation.

Rgds

[Sergiu.Daniluk · Accepted solution]

Hello buddy,

According to config guide:

"""

PIMv4/PIM6 is supported on Layer 3 Out routed interfaces and routed subinterfaces including Layer 3 port-channel interfaces. PIMv4/PIM6 is not supported on Layer 3 Out SVI interfaces.

"""

All limitations (for ACI 5.1) are listed here: https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/5x/l3-configuration/cisco-apic-layer-3-networking-configuration-guide-51x/m_ip_multicast_v2.html

For previous versions, search for Layer3 configuration guide in here  https://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html#Configuration_Guides

then select the IP Multicast section.

Stay safe,

Sergiu