Vlan Pool Dynamic - current usage

[ChrisB.]

hello,

does anyone knows how i could list the Vlan ID being used (mapped) for a dynamic Vlan pool.

this pool ( range of 200 vlan IDs ) has been created for VMM integration.

how can list with the CLI the ID used ( through the GUI Fabric > Access policies > Pools/Vlans/ MYVLAN_POOL >> show usage

thanks in advance

[Robin9]

You can try this cli on apic # show vlan-domain detail name  MYVLAN_POOL

[ChrisB.]

it gives me an empty output :

Legend:
vlanscope: L (Portlocal). Default is global

[Robin9]

after this line (vlanscope: L (Portlocal). Default is global) you will see the some out
I just checked in my lab form one of the apic i have static vlan pools there.

[ChrisB.]

empty output

Legend:
vlanscope: L (Portlocal). Default is global

[Robin9]

okey if you just execute the cli #show vlan-domain details name <--- enter tab and see if you see all your available vlan pool here.

[ChrisB.]

here it lists the Physical domain. unefortunately doesn't list my virtual domain

[Nik Noltenius]

show vmware domain name <NAME OF YOUR VMM DOMAIN> port-group

This shows you the vlans currently used as encaps in port-groups.

[ChrisB.]

hello

thanks for your reply.

forget to say that i have a microsoft domain and i don't see the encap in the output :

here are my line headers :

 Name                            Type   Virt. Net. Adapters   Mgmt. Net. Adapters
 ------------------------------  -----  --------------------  --------------------

[Nik Noltenius]

Just to be sure: You used

show microsoft domain name <VMM DOMAIN NAME> port-group

then, right?

Unfortunately I don't have a Hyper-V environment connected to the fabric so I can't check that...

[ChrisB.]

Hi Nik

yes i did try this command with the Microsoft instead of Vmare and i don't have the Vlan ID picked from my Dynamic VMM pool of IDs