03-29-2018 08:21 AM - edited 03-01-2019 05:30 AM
hello,
does anyone knows how i could list the Vlan ID being used (mapped) for a dynamic Vlan pool.
this pool ( range of 200 vlan IDs ) has been created for VMM integration.
how can list with the CLI the ID used ( through the GUI Fabric > Access policies > Pools/Vlans/ MYVLAN_POOL >> show usage
thanks in advance
03-29-2018 08:34 AM
You can try this cli on apic # show vlan-domain detail name MYVLAN_POOL
03-29-2018 08:40 AM
03-29-2018 08:44 AM
03-29-2018 08:41 AM
empty output
Legend:
vlanscope: L (Portlocal). Default is global
03-29-2018 08:53 AM
03-29-2018 09:02 AM
04-03-2018 02:12 AM
show vmware domain name <NAME OF YOUR VMM DOMAIN> port-group
This shows you the vlans currently used as encaps in port-groups.
04-03-2018 02:33 AM
hello
thanks for your reply.
forget to say that i have a microsoft domain and i don't see the encap in the output :
here are my line headers :
Name Type Virt. Net. Adapters Mgmt. Net. Adapters
------------------------------ ----- -------------------- --------------------
04-03-2018 04:36 AM
Just to be sure: You used
show microsoft domain name <VMM DOMAIN NAME> port-group
then, right?
Unfortunately I don't have a Hyper-V environment connected to the fabric so I can't check that...
04-03-2018 06:00 AM
Hi Nik
yes i did try this command with the Microsoft instead of Vmare and i don't have the Vlan ID picked from my Dynamic VMM pool of IDs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide