Hi,All
I have a problem with the cisco UCS FI 6248UP,the log the following:
loader> set ip 10.1.1.152 255.255.255.0
Correct - ip addr is 10.1.1.152, mask is 255.255.255.0
Found Intel 82575EB at 0x4020, ROM address 0xe980
[Intel 82575EB]Ethernet addr: 00:2A:6A:43:82:A0
Address: 10.1.1.152
Netmask: 255.255.255.0
Server: 0.0.0.0
Gateway: 0.0.0.0
loader> set gw 10.1.1.254
Correct gateway addr 10.1.1.254
Address: 10.1.1.152
Netmask: 255.255.255.0
Server: 0.0.0.0
Gateway: 10.1.1.254
loader> boot tftp://10.1.1.235/ucs-6100-k9-kickstart.5.0.3.N2.2.11e.bin
Address: 10.1.1.152
Netmask: 255.255.255.0
Server: 10.1.1.235
Gateway: 10.1.1.254
Booting: /ucs-6100-k9-kickstart.5.0.3.N2.2.11e.bin console=ttyS0,9600n8nn quiet
platform_type=2 loader_ver="pr-3.0"....|
...............................................................................
.......Image verification OK
Starting kernel...
Usage: init 0123456SsQqAaBbCcUu
INIT: version 2.85 booting
I2C - Mezz absent
sprom_drv_init_platform: nuova_i2c_register_get_card_index
blogger: /var/log/isan.log: No such file or directory (2).
Starting system POST.....
Executing Mod 1 1 SEEPROM Test:...done (1 seconds)
Executing Mod 1 1 GigE Port Test:....done (32 seconds)
Executing Mod 1 1 PCIE Test:.................done (0 seconds)
Mod 1 1 Post Completed Successfully
POST is completed
autoneg unmodified, ignoring
autoneg unmodified, ignoring
S10mount-ramfs.supnuovaca Mounting /isan 3000m
Mounted /isan
Creating /callhome..
Mounting /callhome..
Creating /callhome done.
Callhome spool file system init done.
Checking all filesystems..... done.
##############################################################
Boot has been interrupted or internal disk is not initialized!
##############################################################
Do you want to initialize it? (y/n) y
Disk /dev/sda doesn't contain a valid partition table
Initializing the system
mke2fs 1.35 (28-Feb-2004)
mke2fUnexporting directories for NFS kernel daemon...done.
Stopping NFS kernel daemon: rpc.mountd rpc.nfsddone.
Unexporting directories for NFS kernel daemon...
done.
Stopping kernel log daemon: klogd.
INIT: Going single usere: init
Sending processes the TERM signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)# conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(boot)(config)# int mgmt 0
switch(boot)(config-if)# ip address 10.1.1.152 255.255.255.0
switch(boot)(config-if)# no shutdown
switch(boot)(config-if)# exit
switch(boot)(config)#
switch(boot)(config)# ip default-gateway 10.1.1.254
switch(boot)(config)# end
switch(boot)# copy tftp://10.1.1.235/ucs-6100-k9-kickstart.5.0.3.N2.2.11e.bin bootflash:
Destination: error opening bootflash: Device unavailable or corrupted
switch(boot)#
switch(boot)# dir bootflash:
Usage for bootflash: filesystem
135684096 bytes total used
178888704 bytes free
314572800 bytes available
switch(boot)# init system
This command is going to erase your startup-config, licenses as well as the contents of your bootflash:.
Do you want to continue? (y/n) [n] y
You must set cylinders.
You can do this from the extra functions menu.
Initializing the system
mke2fs 1.35 (28-Feb-2004)
mke2fs: No such device or address while trying to determine filesystem size
switch(boot)#
switch(boot)# copy tftp://10.1.1.235/ucs-6100-k9-kickstart.5.0.3.N2.2.11e.bin bootflash:
Destination: error opening bootflash: Device unavailable or corrupted
switch(boot)#
So,Now how can I recovery the UCS FI 6248UP?
