ACE 4710

[arthurlove]

While i am on roll here.

Does anyone have an example config for ether-channeling the 4 ports into a single switch ?

How does the FT work - seems to me that you need ft conf figured on an interface - this will not add to the channel-group

..again any suggestions

thanks in advance

[htarra]

Here is a link for configuring the Ether-channel on switch.

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008014edfa.shtml

[arthurlove]

Thanks