cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
715
Views
0
Helpful
1
Replies

ACE and Microsoft ISA2006

GSuarez0514_2
Level 1
Level 1

Does anyone know of a whiepaper on how to loadbalance Microsoft ISA 2006 or have a gone through this?  We just moved to the ACE modules and seem to be having problems with ISA (proxy servers) be loadbalanced through the ACE modules.   Users can't access the internet off and on.  Below is what is setup for the ISA portion on the ACE:  Any help would be much appriciated.

rserver host isa01a
  ip address 10.97.198.61
  inservice


rserver host isa01b
  ip address 10.97.198.62
  inservice

serverfarm host isa01
probe tcp-8080
rserver isa01a
   inservice
rserver isa01b
   inservice
  
class-map match-any l4-vip_isa01
  2 match virtual-address 10.97.198.60 tcp eq 8080

  policy-map type loadbalance first-match l7_slb_isa01
  class class-default
    serverfarm isa01

class l4-vip_isa01
    loadbalance vip inservice
    loadbalance policy l7_slb_isa01
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 198

1 Reply 1

kkataja
Level 1
Level 1

Perhaps you should add a sticky serverfarm?

Review Cisco Networking for a $25 gift card