ACE authentication through windows NPS server

[nishchay nadkarni]

Hi,

I have 4700 series ACE appliance with A5 (2.2). I have below configuration in ACE for authentication through windows NPS

radius-server host 10.36.32.89 key 7 "xxxxxxxxxxx" auth-port 1645 acct-port 1646 authentication accounting

aaa group server radius RADIUS

  server 10.36.32.89

  deadtime 15

aaa authentication login default group RADIUS local

aaa accounting default group RADIUS local

I have opened udp ports 1645 and 1646 from ACE to NPS server.

Is any setting needed on windows NPS server for ACE authentication?

[Kanwaljeet Singh · Accepted solution]

Hi Nishchay,

The configuration you have pasted regarding "Radius" seems to be fine but not sure about NPS. But there have been similar discussions before and i am pasting links for your reference. Visit link number 2. One gentleman has even recorded the settings to be done on NPS and posted it. Hope it helps.

https://supportforums.cisco.com/thread/2030593

https://supportforums.cisco.com/thread/217678

https://supportforums.cisco.com/message/463627#463627

Regards,

Kanwal

[nishchay nadkarni]

Hi Kanwaljeet,

Thanks for your reply. The links provided by you were really useful and resolved my issue.

I followed the instructions in third link and created vendor specific attribute in NPS server which resolved the issue.

Regards

Nishchay Nadkarni      

[Kanwaljeet Singh]

Hi Nishchay,

I am very glad to hear that:)

Regards,

Kanwal