I do see the connection to the server establish, but the server admin informs me that they are performing URL filtering and that my packets do not contain a URL! I am not sure what exactly I should do about this.
Config on ACE context:
access-list INBOUND line 10 extended permit ip any any
probe https TMG-Exchange
ssl version all
rserver host real1
ip address 10.50.102.77
rserver host real2
ip address 10.50.102.78
serverfarm host FARM_VIP_10.50.103.239
class-map match-all VIP_CLASS
2 match virtual-address 10.50.103.239 any
class-map type management match-any mgmt-cm
2 match protocol icmp any
3 match protocol ssh source-address 10.48.0.0 255.240.0.0
ACI Fabric start learning external remote IP’s locally on the Leaf switches . Due to this reason, traffic is locally dropped on Leaf Sw03 instead of going outside the fabric. This issue basically interrupted most of the External & Internal services be...
Transforming Day 2 Ops with Cisco Data Center Network Assurance and Insights
Live webinar: Network Insider Series
Wednesday, July 15, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00) Driven by the growth of applications, deluge of data and t...
Hi All,i am going to deploy Hyperflex with Vmware for Testing Purposes.Are there CLI commands to do a factory reset of a new Hyperflex system and rebuild hyper flex again?is there any procedure for rebuild Hyperflex?
Hi,Does the "Cisco’s Massively Scalable Data Center Network Fabric" (MSDC) Architecture be managed by ACI ?I mean can the physical topology of the ACI network be a MSDC network?Cisco’s Massively Scalable Data Center Network Fabric White Paperhttps://www.c...