cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
702
Views
0
Helpful
2
Replies

ACE: Routing in addition to Loadbalancing

s.srivas
Level 1
Level 1

I'm planning to route some traffic while loadbalancing other traffic.

For guidance, what can I refer for simple routing in ACE.

In addition, both routing and loadbalancing traffics need to pass a same Vlan in the ACE.

In the attached Steps 1,2,3 doing loadbalancing via vlan80

Steps 4,5,6 doing routing via same VLAN 80

Is simple routing possible in ACE?

Regards

SS

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

as long as you permit the traffic with an access-list inside the access-group, ace will route the traffic that does not match any class-map.

This is the default and no particular config is required.

Gilles.

View solution in original post

2 Replies 2

s.srivas
Level 1
Level 1

Attaching a digram relating to the above querry.

Gilles Dufour
Cisco Employee
Cisco Employee

as long as you permit the traffic with an access-list inside the access-group, ace will route the traffic that does not match any class-map.

This is the default and no particular config is required.

Gilles.

Review Cisco Networking for a $25 gift card