cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

132
Views
0
Helpful
0
Replies
Highlighted
Beginner

ACE Routing

We have moved our Backend vlans (10.1.3.x & 10.1.4.x) from CSS to ACE recently. To proceed further with the Front end move, we need some configuration assistance with respect to ACE. The scenario is explained below:-

Front End vlans 600 (10.1.6.x) & 700 (10.1.12.x) are currently configured/active in CSS. From the ACE, we have static routes for these vlans to be reachable by the backend Vlans 300 (10.1.3.x) & 400 (10.1.4.x). Once we configure vlan 600 & 700 interfaces in ACE, these networks will be known as locally connected thereby breaking the existing routes to the CSS front end vlans.

In order to perform a phase by phase move if the front end servers, we need to have vlan 600 & vlan 700 configured at both CSS & the ACE End without breaking the production backend & Front end.

Will specific static routes in ace precede the locally connected network or is there a recommended migration plan for this scenario?

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here
This widget could not be displayed.