12-15-2011 03:06 AM
What is this ??
ACE# dir disk0:
2846 Jun 14 2010 15:40:33 NORDICID_PROBE
ACE# sh script code NORDICID_PROBE
Error: Called API is invalid or non-existant
Hardware is ACE-4710-K9 and software A3(2.7)
The probe itself is functioning ok according to show probe detail.
However show script script_name probe_name -counters all remain at zero for some reason. This wasn't the case on the previously use ACE software.
To my recollection the command show script code has worked successfully before on the same ACE software. Not 100% sure though, but it definitely worked on the previous software we ran on the ACE.
Solved! Go to Solution.
12-19-2011 02:19 AM
Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel
12-19-2011 02:19 AM
Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel
12-19-2011 02:23 AM
Thanks a lot!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide