I am having problems getting my 11501 to work with my 2000 Terminal servers. I have been through the basic config and see that the hits under content services statistics but client come back with a "The client could not connect to the Terminal server...
Hi All, has anyone configured box to box redundacy using different CSS models ?(in my case CSS 11154 and 11501). Any precaution in the redundancy script?Thanks in advanceFausto
At what rule layer does a css perform delayed binding?Does a css perform delayed binding on a l3 or l4 content rule or does the inital syn pass directly from the client to the server?Thanks
In a GSS network with a primary GSSM and a Standby GSSM, does the Standby GSSM send keep-alive messages to CRAs, as the primary GSSM does ?Thank youYves Haemmerli
I hope you guys have a clue regarding this really strange issue.First of all im all new to the content switching topic and have no experience reagarding the CSS Series. I usually work with CatOS or IOS based Cisco Devices and have a hard time with th...
Hi Giles, I have to setup monitoring of web sites, as many as 10 per Windows 200X Servers, running IIS 6.I have been trying to monitor with Cisco's SNMS which uses WhatsUpGold. I can discover and monitor the indiviual web servers but not the actual s...
I have a customer interested in balancing servers that run WebMethods. From what I can tell reading through this forum, looks like I might have to try using a script for doing the keepalive.Not being familiar with Webmethods, just wondering if anyone...
We are experiencing issues where a Local Director 416, running 4.2.3 code is duplicating a multicast stream received on it's private interface out it's public interface. The LD interfaces are not secured as there is bridged traffic flowing through i...
Is the Cisco Smartfilter application something that is seperately purchasable (and if so, is there product number for it), or does it come free if you purchase some piece of hardware (and if so, what does it come free with).Sounds like kind of a basi...
I have a CE510 con ACNS 5.0. When I add ip routes in the Routing menu those routes doesnt appear in the GUI and the CLI neither. Everything works ok when I add the routes via CLI?Anybody could help me?Thanks
Hi,I have a few questions about the SCA and how it works in a redundant mode.1. It has a DB-9 connector for failover, I guess this means that it supports redundancy like the PIX active:pasive. Is this correct? Theres is no example of this in the docu...
I have 2 CSS 11052 making server load balancing at layer 3 (with four web servers). I have a VIP addr to talk with clients and 2 FW1 "next generation) in Win200 servers between the CSS and the clients. My clients have some problems in the the establi...
I have a LD 417. I need to load balance 2 web sites(Real servers) with 1 virtual IP. So, I followed the book "Configuring HTTP redirection on Local Director". It says "To use HTTP redirection to load balance between real machines..."I setup the DN...
