CE-505 w/Microsoft Proxy Server Authentication

[bneal]

Recently installed Cisco CE-505 and the customer wants to direct everything to Microsoft Proxy Server for authentication and URL filtering with SurfControl. I added the command: http proxy outgoing host 192.168.90.2 80 primary - which directs all HTTP requests to the Proxy Server; however, the proxy server requests a login. Is there a way to pass either a plain text username and password or how to pass the original login information to the Proxy Server. The only way I know how to get around the problem is to policy route the traffic to the inside interface of the Proxy Server.

Thanks,

Brian

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.