cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1334
Views
0
Helpful
19
Replies

CE590 http Saving

m.abdallah
Level 1
Level 1

I installed Cisco Content Engine 590 on ISP network

How can I test the performance of the CE590 ??

What is the accepted saving percentage ?

sh ver

Cisco Content Engine

Copyright (c) 1999-2001 by Cisco Systems, Inc.

Cisco Content Engine Software Release 3.11 (build FCS May 30 2001)

Version: ce590-cache-3.1.1

Compiled 09:49:25 May 30 2001 by bbalagot

Compile Time Options: PP

System was restarted on Thu Oct 31 11:39:00 2002.

The system has been up for 2 hours, 5 minutes, 42 seconds.

content#

content#sh staticontent#sh statistics htt saving

Statistics - Savings

Requests Bytes

-----------------------------------------------------------

Total: 123145 805553899

Hits: 16533 44281031

Miss: 106612 761272868

Savings: 13.4 % 5.5 %

What is the accepted saving percentage ?

My router show my the following statistics :

Router#show ip wccp web-cache

Global WCCP information:

Router information:

Router Identifier: 62.32.60.254

Protocol Version: 2.0

Service Identifier: web-cache

Number of Cache Engines: 1

Number of routers: 1

Total Packets Redirected: 882029

Redirect access-list: -none-

Total Packets Denied Redirect: 0

Total Packets Unassigned: 0

Group access-list: -none-

Total Messages Denied to Group: 0

Total Authentication failures: 0

Router#show ip wccp web-cache detail

WCCP Cache-Engine information:

IP Address: 62.32.60.250

Protocol Version: 2.0

State: Usable

Initial Hash Info: 00000000000000000000000000000000

00000000000000000000000000000000

Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Hash Allotment: 256 (100.00%)

Packets Redirected: 882673

Connect Time: 02:14:08

I think, the caching performance is not good

What do you suggest ??

Thanks

Mohamed Abdallah

19 Replies 19

Pete,

Thanks for your help

The CE590 saving performance is 30% : 40%

i think this is a good performance

I have a question regarding the CE590

If the internet link is down, and the client open its browser

Should he get the web site from the CE ( browse the cached site ) while the internet link is down ?

Thanks

Regards

Mohamed Abdallah

Pete,

My setup is :

PIX firewall connected between the internal network and the inernet.

All clients & Servers are on the inside network and there are three ISA proxy servers (insdie of the PIX ) which all clients browseres them it for http internet connection.

CE 590 & main router (3661) connectedd the outside of the PIX

Main router 3661 FastEther connected to ouside network of the PIX ( CE 590 on this network also ), and 3661 Serial is connetced to internet.

CE 590 ip address is public address

PIX is doing NAT translation from internal private addresses ( 10.x.x.x ) to public addresses

PTR record with content.uruklink.net to public ip address of the CE590

My CE configuration is :

-----------------------------------

hostname content

!

!

!

!

ip domain-name uruklink.net

!

!

!

!

interface FastEthernet 0/0

ip address 62.32.60.250 255.255.255.0

exit

interface FastEthernet 0/1

shutdown

exit

!

ip default-gateway 62.32.60.254

!

ip name-server 62.32.60.1

!

!

!

!

!

!

!

!

wccp router-list 1 62.32.60.254

wccp web-cache router-list-num 1

wccp version 2

!

!

In the Router configuration :

---------------------------------------

ip wccp web-cache

ip cef

and in the Fastethernet connect to PIX outside and CE 590

ip route-cache same-interface

and in the Serial connect to internet

ip wccp web-cache redirect out

Do I have anything missing or wrong in my CE and router configuration ?

Thanks

Regards

Mohamed Abdallah

pknoops
Level 3
Level 3

I should also add to my other comments that you would certainly be better off running 4.1.2 software on the CE as this is much cleaner code with respect to WCCP. I would have to say that this is critical !!

Pete..

Pete,

The latest ver. of CE on Cisco web is 3.11

where can I get the ver. 4.1.2 ???

Regards

Mohamed Abdallah

Pete,

i have notice that there was NO cfs on my disks

so I created cfs by disk manufacture disk01 cfs command

now my disks :

content#show disk-part disk00

Disk size in 512 byte blocks: 35566448

num: type start size status

-----------------------------------------------------

0: SWFS 32 3145728 System Reserved

1: SYSFS 3145760 7113289 mounted at local1

2: NONE

3: NONE

Free disk space: 25307431 blocks (12357 M)

content#show disk-part disk01

Disk size in 512 byte blocks: 35566448

num: type start size status

-----------------------------------------------------

0: CFS 32 35566448 mounted

1: NONE

2: NONE

3: NONE

Free disk space: 0 blocks (0 M)

content#

**** The Saving percentage increase but still have a lot of bypass ****

content#show stat http sav

Statistics - Savings

Requests Bytes

-----------------------------------------------------------

Total: 7055526 52055575500

Hits: 1680348 6605533706

Miss: 5375178 45450041794

Savings: 23.8 % 12.7 %

content#

content#show bypass

Total number of HTTP connections bypassed = 192678

Connections bypassed due to system overload = 0

Connections bypassed due to authentication issues = 0

Connections bypassed due to facilitate error transparency = 192678

Connections bypassed due to static configuration = 0

Total number of entries in the bypass list = 35

Number of Authentication bypass entries = 0

Number of Error bypass entries = 35

Number of Static Configuration entries = 0

content#

content#

content#

content#show bypass list

Client Server Entry type

------ ------ ----------

62.32.60.40:0 66.180.230.128:80 server-error

62.32.60.41:0 66.180.230.143:80 server-error

62.32.60.41:0 207.68.176.190:80 server-error

62.32.60.40:0 208.184.29.70:80 server-error

62.32.60.41:0 199.104.132.230:80 server-error

62.32.60.41:0 216.136.131.30:80 server-error

62.32.60.41:0 66.180.230.42:80 server-error

62.32.60.40:0 213.253.55.27:80 server-error

62.32.60.41:0 209.157.71.50:80 server-error

62.32.60.41:0 217.66.226.9:80 server-error

62.32.60.41:0 216.239.37.102:80 server-error

62.32.60.40:0 207.46.196.108:80 server-error

62.32.60.40:0 193.232.242.71:80 server-error

62.32.60.41:0 213.219.2.46:80 server-error

62.32.60.41:0 195.188.170.32:80 server-error

62.32.60.40:0 66.180.230.135:80 server-error

62.32.60.41:0 207.46.196.108:80 server-error

62.32.60.40:0 66.179.17.168:80 server-error

62.32.60.41:0 198.65.220.224:80 server-error

62.32.60.40:0 152.163.208.185:80 server-error

62.32.60.41:0 208.184.29.50:80 server-error

62.32.60.40:0 216.27.95.48:80 server-error

62.32.60.40:0 63.88.212.80:80 server-error

62.32.60.40:0 81.9.32.2:80 server-error

62.32.60.41:0 152.163.208.185:80 server-error

62.32.60.40:0 66.180.230.110:80 server-error

62.32.60.40:0 165.193.123.40:80 server-error

62.32.60.41:0 64.55.105.88:80 server-error

62.32.60.41:0 216.239.33.100:80 server-error

62.32.60.41:0 216.244.111.206:80 server-error

62.32.60.40:0 216.32.242.251:80 server-error

62.32.60.41:0 209.54.220.67:80 server-error

62.32.60.41:0 213.171.193.15:80 server-error

62.32.60.41:0 216.239.51.106:80 server-error

62.32.60.41:0 204.71.61.248:80 server-error

62.32.60.41:0 66.180.230.41:80 server-error

62.32.60.41:0 209.71.218.253:80 server-error

Do you have suggestion ??

Thanks for your help

Regards

Mohamed Abdallah

Review Cisco Networking for a $25 gift card