cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

479
Views
0
Helpful
1
Replies
jaynar_jez
Beginner

Cisco WAVE-574

Hello everybody!!!

I have a problem with my wave-574. It doesnt respond anything. I've tried to connect via telnet or console cable, tried to reload by pulling out the power cable but nothing had change. Only power button led is amber and others are off!!!.... please help !!!

P.S Network leds are green and blinking.

1 REPLY 1
finn.poulsen
Participant

Hi,

Try pressing the power button - check here (last part of chapter)

http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/wave/installation/574/guide/WAVE-574_HIG/574intr.html#wp1040319

The WAVE-574 (and actually the WAVE-274 model) have a somewhat weird power behaviour.

Even though power is attached to the device, it is not automatically powered on - you have to press the power button.

Otherwise you'll end with this amber ligth.

The NIC link led is lit because it receives link from the switch.

Hope this helps.

Best Regards

Finn