cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1057
Views
0
Helpful
5
Replies

Connectivity Issue - Server Network

pedrominas
Level 1
Level 1

Hi you all

I'm having connectivity issues, from my network, with the Servers Network that's located behind the Ace 4710... I'm monitoring the servers and i get Timeouts with a simple ICMP monitor...

I never have problems regarding the access to the Admin context, but in the context that i use to load balance the applications i have problems
reaching directly the servers...

For example... I have two servers and i lose connectivity with one of them for about 2-5 minutes and then i regain connectivity... If i undo the ft group and redo the ft group i regain instant access to the server...

I cleared all the config for the actual loadbalance and left the config regarding the client and server networks...

Any help??

Thanks in advance...

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

Get us a show tech.

Also check the advanced troubleshooting guide in the blog section.

Gilles.

View solution in original post

5 Replies 5

Gilles Dufour
Cisco Employee
Cisco Employee

Get us a show tech.

Also check the advanced troubleshooting guide in the blog section.

Gilles.

Thanks for the reply Gilles...

What do you mean with a show tech...

I'm looking at you blog posts...To see if it helps...

capture the output of the command "show tech" from the context having the issue and post it here.

Gilles.

The blog articles look really good...

But for now i need to first resolve this issue...

Thanks in advance...

Any news??

Thanks...

Review Cisco Networking for a $25 gift card