02-28-2011 03:30 AM
Hi you all
I'm having connectivity issues, from my network, with the Servers Network that's located behind the Ace 4710... I'm monitoring the servers and i get Timeouts with a simple ICMP monitor...
I never have problems regarding the access to the Admin context, but in the context that i use to load balance the applications i have problems
reaching directly the servers...
For example... I have two servers and i lose connectivity with one of them for about 2-5 minutes and then i regain connectivity... If i undo the ft group and redo the ft group i regain instant access to the server...
I cleared all the config for the actual loadbalance and left the config regarding the client and server networks...
Any help??
Thanks in advance...
Solved! Go to Solution.
02-28-2011 07:59 AM
Get us a show tech.
Also check the advanced troubleshooting guide in the blog section.
Gilles.
02-28-2011 07:59 AM
Get us a show tech.
Also check the advanced troubleshooting guide in the blog section.
Gilles.
02-28-2011 08:08 AM
Thanks for the reply Gilles...
What do you mean with a show tech...
I'm looking at you blog posts...To see if it helps...
02-28-2011 08:12 AM
capture the output of the command "show tech" from the context having the issue and post it here.
Gilles.
02-28-2011 08:26 AM
03-01-2011 06:00 AM
Any news??
Thanks...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide