11-07-2013 04:16 AM
Hi all,
Does anybody have a serial console cable, and showing how 9 pin in both end should go to?
Jan Rockstedt
Solved! Go to Solution.
11-07-2013 04:59 AM
Hi Jan,
Oh okay. Sorry i misunderstood your question. So are you looking for DB-9 pin out details? The console cable you have is a standard DB-9 cable.
Regards,
Kanwal
11-07-2013 04:52 AM
Hi Jan,
The WAE 574 has female serial console port on it and you should have male console cable 9 Pin to fit into the port. Please have a look below:
Regards,
Kanwal
11-07-2013 04:56 AM
Hi,
Sorry but this does not answer my question, as I already know that it should be 9pin to 9 pin female.
My question is what pin goes to what pin for tha cable?
Jan
11-07-2013 04:59 AM
Hi Jan,
Oh okay. Sorry i misunderstood your question. So are you looking for DB-9 pin out details? The console cable you have is a standard DB-9 cable.
Regards,
Kanwal
11-11-2013 11:30 PM
Hi Jan,
I ran into the same issue and there is little info on the pins. Purchased blank DB9 to RJ45 backshells and created our own. The pins below work with the Rollover cable conected to it to manage via Console 512/612.
RJ45 | DB9 |
1 | N/C |
2 | N/C |
3 | 3 |
4 | 5 |
5 | 5 |
6 | 2 |
7 | N/C |
8 | N/C |
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide