04-21-2006 09:41 AM
Hi everybody,
Do you know how can I understand the CPU utilization on the module CSM?
I use the comand: show mod csm all tech-s util, but I am not able to understand the real % of utilization like "show process cpu".
Could you help me?
Thanks
Ira
04-27-2006 06:41 AM
I would suggest that you use the "Show processes cpu" command. This command work on the CSM modules as well.
05-24-2006 05:58 PM
but there is no snmp oid for thes cpu values
05-25-2006 05:51 AM
There are 6 processors in the CSM.
5 IXP's and 1 PPC.
Each IXP total CPU are given at the bottom of the show commands.
The PPC CPU is always running at 100% - this is normal.
The PPC divides the cpu between all the processes.
What you get at the top is a list of all the processes.
You have to make sure each ixp is not constantly running above 60%.
For the PPC, there is not much to monitor.
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide