cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
460
Views
0
Helpful
1
Replies

CSM and TCL scripted Keepalive

yves.haemmerli
Level 1
Level 1

Hi,

In the CSM documentation, it is stated that once a script is loaded in the CSM, it cannot be removed. It can only be replaced with "no script file" - "script file" commands. However, I see that if I remove the script file command from the configuration, the script do not stay in the CSM during a module reset or reboot...Does this mean that each time the CSM reloads, a TFTP server of a flash card has to be available to load the script ? Is there a mean to make the script permanent in the CSM ?

Thank you

Yves Haemmerli

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

indeed, after a reboot the CSM needs to reload all the scripts.

You can have the script loaded on the MSFC/SUP disk and load them from there if you don't want to maintain connectivity to an external server.

Gilles.

View solution in original post

1 Reply 1

Gilles Dufour
Cisco Employee
Cisco Employee

indeed, after a reboot the CSM needs to reload all the scripts.

You can have the script loaded on the MSFC/SUP disk and load them from there if you don't want to maintain connectivity to an external server.

Gilles.

Review Cisco Networking for a $25 gift card