CSM and TCL scripted Keepalive

[yves.haemmerli]

Hi,

In the CSM documentation, it is stated that once a script is loaded in the CSM, it cannot be removed. It can only be replaced with "no script file" - "script file" commands. However, I see that if I remove the script file command from the configuration, the script do not stay in the CSM during a module reset or reboot...Does this mean that each time the CSM reloads, a TFTP server of a flash card has to be available to load the script ? Is there a mean to make the script permanent in the CSM ?

Thank you

Yves Haemmerli

[Gilles Dufour · Accepted solution]

indeed, after a reboot the CSM needs to reload all the scripts.

You can have the script loaded on the MSFC/SUP disk and load them from there if you don't want to maintain connectivity to an external server.

Gilles.