03-19-2008 02:55 AM
Hi,
I have a basic question regarding CSM...
Is there a way to configure a server behind a CSM without load-balancing a traffic to that server? In other words, I dont want for CSM to see a traffic to specific server, only to pass it without any intervention, but to work with other servers traffic. Is it possible?
Thanks in advance
Solved! Go to Solution.
03-19-2008 03:07 AM
So you just want the CSM to route the traffic.
This is possible.
If you are in bridging mode, there is nothing to do.
In routing mode, you need to allow traffic to be routed.
you can play with variable ROUTE_UNKNOWN_FLOW_PKTS - check documentation to see the possible setting and how it can help you.
Another solution is to catch the traffic you want to route with a vserver and associate it a serverfarm with predictor forward and no nat server.
ie:
serverfarm route
predictor forward
no nat server
inservice
!
vserver route
virt x.x.x.0/24 any
serverfarm route
inservice
Gilles.
03-19-2008 03:07 AM
So you just want the CSM to route the traffic.
This is possible.
If you are in bridging mode, there is nothing to do.
In routing mode, you need to allow traffic to be routed.
you can play with variable ROUTE_UNKNOWN_FLOW_PKTS - check documentation to see the possible setting and how it can help you.
Another solution is to catch the traffic you want to route with a vserver and associate it a serverfarm with predictor forward and no nat server.
ie:
serverfarm route
predictor forward
no nat server
inservice
!
vserver route
virt x.x.x.0/24 any
serverfarm route
inservice
Gilles.
03-19-2008 03:40 AM
Thank You for a great answer!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide