CSM Security

[jefferson.macedo]

Configuration

vlan 14 client

vlan 20 server

vlan 15 client

vlan 21 server

I wanna know, How can I enable access-lists to prevent vlan 14 client to access vlan 21 server.

Is it possible?

[Gilles Dufour]

if you are configured in routing mode [vlan 14 and vlan 21 do not share the same subnet] this is done by default.

You need a vserver to ALLOW the traffic from a client vlan to a server vlan.

If you want to limit this vserver to vlan 15, you can use the command 'vlan 15' under the vserver configuration.

Regards,

Gilles.