CSS (WebNS 8.10) commit_vip_redundancy script error

[Martin Kyrc]

Hi guys,

I would like 'sync' configuration on both (master and backup) CSS boxes. I have never problem with this procedure, but now a got this message (debug output):

IPTV_SWL4-main# commit_VipRedundConfig "-d"

IPTV_SWL4-main#

Checking available disk space on systems ...

Checking the disk space locally before continuing with the script.

Verifying that another local session is not running the script.

Creating script/vipr_config_sync_lock file.

Verifying app and redundancy configs ...

Verifying that app session is up with backup switch.

Making sure app session is up.

Seconds to wait before calling it quits: 60

Checking the disk space remotely before continuing with the script.

Checking local and remote switch versions ...

Storing the running code versions of the local and remote switch.

Storing the local switch's version.

Retrieving the remote switch's version.

Checking remote version for 4.0

Checking if switch is BACKUP for any virtual routers and if

the state is 'No Service'.

Checking vip redundancy state....

Working

Checking if backup switch is Master for any VRIDs.

If it is, either a local interface that once held redundant vips

has been removed or the Backup is a Master for another vip-redundant

relationship.

Saving Master running-config to startup-config and archiving startup-config.

Copying running-config to startup-config.

Archiving startup-config.

Swapping Master and Backup ip addresses in tmp.cfg for app

and redundancy interface.

Error in script playback line:1451

>>>function REPLACE_TEXT call "tmp.cfg localIp backupIp 0 SUB_STRING_IP"

IPTV_SWL4-main#

Script Playback cancelled.

It's a bug in WebNS 8.10 commit script? I have upgraded box from 7.40 to 8.10.

IPTV_SWL4-main# sh ver

Version: sg0810002 (08.10.0.02)

Flash (Locked): 07.20.1.04

Flash (Operational): 08.10.0.02

Type: PRIMARY

Licensed Cmd Set(s): Standard Feature Set

thanks for help.

--

martin kyrc, slovakia

[Gilles Dufour]

CSCei55651 - "commit vip script fails when executing"

You should upgrade to 8.10(1.06) or later

Gilles.

[Martin Kyrc]

I tried 8.10(1.06) and 8.10(2.05), but the same problem occured. Look at the output.

---start of output---

IPTV_SWL4-main# commit_VipRedundConfig "-a"

IPTV_SWL4-main#

Checking available disk space on systems ...

Checking compatibility of systems......

Working -

Error in script playback line:1454

>>>function REPLACE_TEXT call "tmp.cfg localIp backupIp 0 SUB_STRING_IP"

IPTV_SWL4-main#

Script Playback cancelled.

---end of output---

I cant't find any bug for this problem. In other words all bugs that I found (CSCeh70874, CSCei55651) aren't for this problem.

Maybe is prblem in function REPLACE_TEXT (number or type of arguments,etc).

Has anybody solution for this? If I will find no solution for this I will open it at TAC.

thx

--

martin

[Gilles Dufour]

Martin,

there thousands of people running 8.10 and using this script. It works fine.

There must be something specific in your config or environment.

You should capture a 'show tech' and open a service request with the TAC.

Gilles.

[Martin Kyrc]

Gilles,

I thought... ok, I will open a service request with the TAC.

martin

[Martin Kyrc]

Hello,

problem is solved. I use for app session management IP instead of circuit IP. Now is for app session used circuit IP and all is running.

--

martin

[prasanna.ar]

Hi martin,

Can you please help on this issue.

i have some problem with conf sync..

CSS11501# script play commit_redundancy "10.0.0.1 -a -d -s"

CSS11501#

Checking the disk space locally before continuing with the script.

COMMIT_REDUNDANCY Version: 4.6

Verifying that ip redundancy is activated on Master switch.

Verifying that app session is up with backup switch.

Making sure app session is up.

Seconds to wait before calling it quits: 120

Checking the disk space remotely before continuing with the script.

Storing the running code versions of the local and remote switch.

Storing the local switch's version.

Retrieving the remote switch's version.

Checking remote version for 4.0

Checking Master redundancy-config for redundancy-protocol set

and if so storing it in variable MASTER_IP.

Verify that the Ip Address specified is the Backup's Ip Address.

Making sure app session is up.

Seconds to wait before calling it quits: 120

LOCAL switch is a css11501,7

REMOTE switch is a css11501,7

Saving Master running-config to startup-config and archiving startup-config.

Copying running-config to startup-config.

Archiving startup-config.

Copying startup-config to a temp file tmp.cfg.

Checking for multiple APP sessions between redundant peers.

Swapping Master and Backup ip addresses in tmp.cfg for app

and redundancy interface.

Checking if ip redundancy master is set

Using rcmd to copy tmp.cfg to a file on Backup switch.

Archiving copy to Backup's startup-config.

Archiving Backup's current startup-config.

Restoring startup-config (new copy) to startup-config.

Clearing running-config.

Script playing the copy script of the Master's running-config.

10.0.0.1 NOT_USED NOT_USED NOT_USED NOT_USED 0

Checking to make sure backup App goes down

Making sure app session is down.

Seconds to wait before calling it quits: 1420

Copy success being verified by comparing byte sizes of archived running-

configs of the Master switch and the Backup switch.

Making sure app session is up.

Seconds to wait before calling it quits: 1340

Comparing the byte count now.

Accounting for IP address size differences.

Adding 0 bytes to LOCALCONFIG byte count

Adding 0 bytes to REMOTECONFIG byte count

Config Sync Failed.