01-15-2002 09:49 PM
Does anyone know if the CSS supports instead of serving a zone send dynamic DNS updates for a zone ?
01-24-2002 02:14 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
02-20-2002 01:39 PM
DNS functionality on the CSS is pretty limited. The CSS can only resolve 'a' record requests for a particular sub-domian.
To make this work you'll need to configure NS records on higher level DNS servers using the circuit VLAN address of the CSS. From there, you type 'add DNS' and the domain name on the content rule for which you would like to resolve the request.
Hope that helps answer your question.
Cheers,
Perry.
03-13-2002 08:27 AM
I think I understand your point, but since I am not a DNS guru I'd like to see an example. Do you have one?
06-06-2002 04:56 PM
Yes it does, though I have never configured it so it works properly. The Doco on the website is not that specific
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide