04-12-2007 08:15 AM
Hi there...we have an ftp service that uses the ftps protocol (port 990 I believe) and I can't seem to get it to work behind the CSS....I get to the authentication but the data channel is not making it through...
I also think that port redirection may be causing some issues as well..
My content rule is listening on port 990, and the service rule is using port 6855 (see below for config snippets)
service blahblah:6855
ip address 161.19.6.133
protocol tcp
port 6855
keepalive port 6855
active
content webmthd_b2b_ftps_dev
vip address 161.19.6.28
port 990
protocol tcp
add service blahblah:6855
active
Any thoughts, suggestions, or advice would be greatly appreciated.
Thanks in advance!
These forums are the most useful learning and troubleshooting tool I have ever used! Keep up the good work...
04-12-2007 09:42 AM
Try the following
Group ftp
VIP address 161.19.6.28
Add service blahblah:6855
Active
content webmthd_b2b_ftps_dev
vip address 161.19.6.28
Application ftp-control
port 990
protocol tcp
add service blahblah:6855
active
Syed Iftekhar Ahmed
04-12-2007 11:19 AM
Thanks man....I will try it this evening...I have a change ticket scheduled for then....will post results here tomorrow.
Thanks again!
Sandman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide