hardware compatible check cisco waas inline network card.

syjeon · ‎01-05-2011

hi. all.

I would like to know whether cisco wae-274 inline card support on cisco wae-574.

we have one pair group inline network adapter card. if we need to change cisco wae-274 inline card to deploy wae-574, Is it working well ?

moreover, is there any command which to check inline card is or not on cisco wae.?

Michael Korenbaum · ‎01-05-2011

Hi,

The Inline card for the 274 can not be transferred to the 574 as they are different form factor appliances.

See the data sheet here for the WAVE product line.

To see if there is an inline card in your WAVE use the show hardware command:

pdi-574-rtp#sh hardware

Cisco Wide Area Application Services Software (WAAS)

Cisco Wide Area Application Services (universal-k9) Software Release 4.2.3 (build

b7 Jul 29 2010)

Version: oe574-4.2.3.7

Compiled 01:16:47 Jul 29 2010 by damaster

Device Id: 00:26:55:11:7e:e0

System was restarted on Sat Dec 25 07:34:26 2010.

The system has been up for 1 week, 4 days, 3 hours, 35 minutes, 33 seconds.

CPU 0 is GenuineIntel Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (rev 15) run

ning at 2393MHz.

CPU 1 is GenuineIntel Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (rev 15) run

ning at 2393MHz.

CPU 2 is GenuineIntel Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (rev 15) run

ning at 2393MHz.

CPU 3 is GenuineIntel Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (rev 15) run

ning at 2393MHz.

Total 4 CPUs.

6144 Mbytes of Physical memory.

1024 MBytes of flash memory

1 CD ROM drive (Vendor TEAC Model DV-28E-V )

2 GigabitEthernet interfaces

1 InlineGroup interface.

1 Console interface

Regards,

Mike Korenbaum

Cisco WAAS PDI Help Desk