How to configure 2 CSM modules in 6500 ?

[mishao]

hi,

6500 supports multiple CSM modules in one chassis. I check the configuation about the CSM with 2 modes one is rp and another is csm. another mether is to enter the csm module. Does anyone know the current way to setup the 2 csm modules in one 6500 or give me a sample ?

best regards.

fred.

[mschnabe]

If you are running muliple CSM's in the same chassis you need to run in csm mode, otherwise if you are running a single csm in a chassis you can run in rp mode.

hope that helps

I am running one csm in each chassis and fault-tolerant

mark

[mishao]

hi,

I can't see any configure about the second CSM in CSM mode.

This is my problem.

best regards.

fred.

[Gilles Dufour]

what do you mean you don't see the config ?

You should create it after entering the following 'mod csm '

I have 2 in the same catalyst and I can see the config for both.

Gilles.