Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have several already deployed 2811 that I'd like to turn on the IPS feature. IOS firewall is already running. We also have just deployed VMS. Is there any order that need to be followed to get these into VMS. Should I import them into Router MC or ...
The dwdm design I'm working with calls for several EDFA's but I dont need the default 23 db gain I only want 10 according to my optical budget. What is the best way to accomplish this?Thanks in advanceMark
Can someone who has done this before guide me in how to set up a sorry server on a csm. . The documentation isnt helping me out alot. I'm doing 2 csm's in ft and sticky ip and if that service/server isnt available while failover is happening..I want ...
How do I config a static or default route for the ethernet management port so I can get to the ethernet management port from remote subnets.Is there a workaround?thanks
I have a customer requirement to use the new firewall services module and IPSec VPN module along with the NAM module and content switch module all in the same hardened 6509 chassis. Is this possible and if so are all the features available or are th...
I am having the same issue and open TAC case for several days..with 1841 and 2811's..same software and IOS It works with advipservices but not with advsecurity
I've upgraded to the latest T train 12.3(14)T2 PostOffice is no longer supportedWe are having problems importing the 2811's into the IDS MC. We have yet to be successful
These are EDFA1's and they have 3 modes: constant-pump current mode, constant-pump power mode and constant-output power mode. What I'm looking for is what mode to be running and how to config them to only get 10db gain out instead of the default 23db...
If you are running muliple CSM's in the same chassis you need to run in csm mode, otherwise if you are running a single csm in a chassis you can run in rp mode.hope that helpsI am running one csm in each chassis and fault-tolerantmark
