10-26-2001 09:36 AM
I have two Vlans(Vlan1 and Vlan2). I have interface e8 of the CSS11050 on Vlan2
I have two Windows NT 4.0 running IIS 4, with the default gateway pointing to the e8 of the CSS11050
To make the store short the setting work for Netscape. But with IE it times out?
All devices are plug in two Catalyst 6509.
10-31-2001 12:20 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
10-31-2001 10:44 PM
Are these SSL connections or is the problem with HTTP? Are you using sticky SSL? IE 5.5 and earlier has timeout issue with SSL. If this is not the case open up a case with TAC.
01-31-2002 08:31 AM
Jose,
We are experiencing this issue, IE and SSL connections. Do you have a Tech note, or other paperwork that I could take to our developers.
Thanks
01-31-2002 09:06 AM
I was not able to get bridging work correctly on the css11000. Here is how I got around this issue. I made the CSS11000 a node on the network. Added the service(web1, web2, etc) and I created different contents for ports 80 and 443. I assigned the same VIP address to both contents. Also you need to change the server default gateway to point to the CSS11000.
I hope this help you.
KK
01-31-2002 09:28 AM
I forgot to add the following
You have to add services to both contents. For example you have to add service web1 to content test1 containing the port 443 and also you need to add service web1 to the content test2 containing the port 80.
Also I would like to add that this works with IE, Netscape and AOL browser.
I hope this helps
KK
02-20-2002 12:27 PM
Microsoft knowledgebase article #Q265369. MSIE 5 and IIS servers will exchange SSL keys every 2 minutes which will break sticky connections based on SSID.
The workaround is to either use 'stickymask' as the sticky method, or the more elegant solution is to use a Secure Content Accelerator to terminate all your SSL traffic, decrypt it, and send it to the CSS as clear text.
Hop ehtis helps.
Cheers,
Perry.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide