cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
530
Views
0
Helpful
1
Replies

Implementing WAA (with Topology)

rodolphoxt
Level 1
Level 1

Hello,

Nice, I call Rodolpho and I'm from Brazil. Sorry if my English is bad. I wonder whether WAAS will work in topology with my GRE tunnels without problems, because I have over 20 offices with tunnels reaching in my datacenter by MPLS network. NM modules put in offices in my ISR routers.

Thank you very much!

1 Accepted Solution

Accepted Solutions

dstolt
Cisco Employee
Cisco Employee

Rodolpho,

Yes, you should be able to implement WAAS in your topology. You can intercept on your ISR (even on the tunnel interfaces) and as long as your interception and optimization is inside the checkpoint FW, you should be fine in the DC.

Hope that helps,

Dan

View solution in original post

1 Reply 1

dstolt
Cisco Employee
Cisco Employee

Rodolpho,

Yes, you should be able to implement WAAS in your topology. You can intercept on your ISR (even on the tunnel interfaces) and as long as your interception and optimization is inside the checkpoint FW, you should be fine in the DC.

Hope that helps,

Dan

Review Cisco Networking for a $25 gift card