Major function of 4 SS-11800 modules: IOM,SFM,SCM,IDM

[w-hu]

Anybody can tell me which are the major function of the four following modules on the CSS-11800:

IOM: Input/output Modules

SCM: Switch Fabric Modules

SCM: Switch Control Module

IDM: Integrated Disk Module

which module will handle NAT, which one handle URL inspection, and which one will handle routing and networking management?

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources online at http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.