Ping real servers behind CSS

[frankamankwah]

Do I have to do anything on the CSS in order to be able to successfully ping servers hanging off the routed CSS?

My network setup is as shown below. I can ping the circuit IP address connected to the server farm but can't ping anything on the server farm from the outside switch.

Sw ==> CSS ==> Srv farm

Thanks

[Gilles Dufour]

nothing special is required.

Make sure the return path from server to client is ok.

If you have nating enabled, make sure the return path goes through the CSS.

Capture a sniffer trace on the server to see if traffic is coming in and if there is a response check the destination mac.

Gilles.