06-07-2012 07:12 PM
In general, Primary and Standby CM's database tables, configurations, group polices should be sync'd up and looked identical, right? What else will be different and will require to import onto standby CM manually? Things like: SSL certificate, Secure store encryption...etcs.
Thanks!
Joe
Solved! Go to Solution.
06-15-2012 03:58 PM
Hello Joe,
I don't think you're leaving anything behind in regards how primary and standby CM sync works, just follow the steps from the configuration guide and everything will be taken care,if there was any doubt just let us know what WAAS software version your running and the specific question. Critical files like Secure-store and SSL certificates will be automatically sync as well.
Still, in my experience I stronly suggest to make sure your devices time settings are right.
Time settings is very important for the sync to work fine, best way is to use an NTP.
Please find the attached link to configure NTP and timezone:
Configuration Guide:
================
Command Reference:
Good Luck!
06-15-2012 03:58 PM
Hello Joe,
I don't think you're leaving anything behind in regards how primary and standby CM sync works, just follow the steps from the configuration guide and everything will be taken care,if there was any doubt just let us know what WAAS software version your running and the specific question. Critical files like Secure-store and SSL certificates will be automatically sync as well.
Still, in my experience I stronly suggest to make sure your devices time settings are right.
Time settings is very important for the sync to work fine, best way is to use an NTP.
Please find the attached link to configure NTP and timezone:
Configuration Guide:
================
Command Reference:
Good Luck!
06-16-2012 12:25 PM
Perfect. Thanks for taking time to answer my question Felix!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide