probe settings

[12pratham]

Please let me know if i can change the probe settings to 40 sec instead of current values

probe tcp PROBE_HTTP
  port 161

  interval 3
  faildetect 2
  passdetect interval 3
  open 10

as the servers are responding to the probes by ACE LBs ,every sec   ,creating huge amount of log files on the server.

Let me know if I can change the probe values

[Alex Rickard]

Probe settings are configurable. To configure the frequency that the ACE sends the probe use the interval seconds comand. The seconds part of the command is the time interval that you would like to configure. Open, faildetect, passdetect items are also configurable. For details on health monitoring, see the server load balancing configuration guide. I have included the link for the A4(1.0) guide below.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_1_0/configuration/slb/guide/probe.html#wp1031139