Hello,
I have 1 WAVE-594 with 2x500GB HDD and i want to configure raid-1.
In the follwoing site reffers that for WAVE-594 is optional.
http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/waas_optposter_r8.pdf
From the show disks details command i have the follwoing output
Physical disk information:
disk00: Present 32FOT09VT (h00 c00 i00 l00 - Int DAS-SATA)
476937MB(465.8GB)
disk01: Present 32FOT0BTT (h01 c00 i00 l00 - Int DAS-SATA)
476937MB(465.8GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/sda1 1983MB 870MB 1113MB 43%
/swstore internal /dev/sda2 1983MB 807MB 1176MB 40%
/state internal /dev/sda3 5951MB 266MB 5685MB 4%
/local/local1 SYSFS /dev/sda6 14878MB 502MB 14376MB 3%
/vbspace GUEST /dev/data1/vbsp 173588MB 128MB 173460MB 0%
/local/local1/spool
PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 101177MB 176MB 101001MB 0%
/ackq1 internal /dev/data1/ackq 1189MB 0MB 1189MB 0%
/plz1 internal /dev/data1/plz 2379MB 1MB 2378MB 0%
No RAID devices present.
Disk encryption feature is disabled.
How can i enable raid-1? I cannot find any command in the configuration guide.
Thank you
