cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1047
Views
0
Helpful
1
Replies

Raid-1 Support in WAVE-594

tasoskypraios
Level 1
Level 1

Hello,

I have 1 WAVE-594 with 2x500GB HDD and i want to configure raid-1.

In the follwoing site reffers that for WAVE-594 is optional.

http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/waas_optposter_r8.pdf

From the show disks details command i have the follwoing output

Physical disk information:

  disk00: Present    32FOT09VT  (h00 c00 i00 l00 - Int DAS-SATA)

          476937MB(465.8GB)

  disk01: Present    32FOT0BTT  (h01 c00 i00 l00 - Int DAS-SATA)

          476937MB(465.8GB)

Mounted file systems:

MOUNT POINT    TYPE       DEVICE                  SIZE     INUSE      FREE USE%

/sw            internal   /dev/sda1              1983MB     870MB    1113MB  43%

/swstore       internal   /dev/sda2              1983MB     807MB    1176MB  40%

/state         internal   /dev/sda3              5951MB     266MB    5685MB   4%

/local/local1  SYSFS      /dev/sda6             14878MB     502MB   14376MB   3%

/vbspace       GUEST      /dev/data1/vbsp      173588MB     128MB  173460MB   0%

/local/local1/spool          

               PRINTSPOOL /dev/data1/spool        991MB      32MB     959MB   3%

/obj1          CONTENT    /dev/data1/obj       101177MB     176MB  101001MB   0%

/ackq1         internal   /dev/data1/ackq        1189MB       0MB    1189MB   0%

/plz1          internal   /dev/data1/plz         2379MB       1MB    2378MB   0%

No RAID devices present.

Disk encryption feature is disabled.

How can i enable raid-1? I cannot find any command in the configuration guide.

Thank you

1 Reply 1

tasoskypraios
Level 1
Level 1

I found it

The command was disk insert but not from configuration mode. This process is not described in the configuration guide.

disk insert