Redundancy in physical interface tracking .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-06-2012 11:07 AM
Hi ,
We are managing almost 20 ACE in different location in HA mode . Right now the configuration is for redundancy in ft group and ft track in user context and this redundancy are working well good . My new requirement is to track the physical interface in admin context ,where my ACE designed to track only the interface vlan now in user context .
When two interface goes down in the ace , failover should happen to secondary . where all the four interface is bundle in single port channel . when two interface goes down , load in the port channel will be increased to avoid this , any redundant configuration is there ? to switchover the active role to secondary .
Regards ., Gopinath Vedagiri
- Labels:
-
Application Networking
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-06-2012 05:59 PM
Hi,
If a port in a channel goes down, it is treated as a link failure and its traffic is transferred to one or more of the remaining ports in the channel by design.
But one option is to track a neighbor router IP with the host tracking option (not used with port channel though) .
Regards,
Siva
