SCA Configuration without CSS

[mdeleonibus]

I am trying to use an SCA2 device to off-load SSL traffic, but do not have a CSS device in line. I am getting "no data on page" and wanted to verify that the config is possible and if it is correct. Here is what we have now...

Client (10.0.0.1)

|

Switch

|

SCA (IP Address 10.0.0.2)

|

Web Server - Apache (IP Address 10.0.0.3)

I am using the default cert on the SCA and the apache server is running on a Sun box running Solaris 8 with MAC masquerading turned off.

Thanks in advance for the help.

[mvoight]

There is not enough data to go on here.

Is "transparent" or "no transparent" configured in the ssl server on the SCA? Is mode two port configured?

What is the full configuration of the SCA?

Is the server attached to the "server" interface of the SCA?

It is possible to use the SCA without a load balancing device.