Hi,
Question 1.
I understand that you need to use cross cable to connect LD417 to Cisco switch 2900. What would be the result if you use straight cable ?
Question 2.
What would happen with the following scenario in LD417 ? LD417 port 3 is connected to server A via cross cable. Port 4 is connected to server B via cross cable. Server A and B use the same subnet. Server A and B need to connect to each other (socket). A switch is connected to the LD417 via port 2. Server C is connected to the switch (via straight cable). Server A and C need to connect to each other. Server A and C are in the same subnet.
Thanks in advance.