sync config between active and standby CSM

[cwtsoi8]

Is there a way to sync config between active and standby CSMs? Just as one that in CSS.

How about two SSL Service module in two different 6500 chassis?

Thanks.

[jfoerster]

HI,

there is right now no command to commit redundancy between two CSM-Modules. Maybe in the future there will be one. Okay in regards of sync the only way is to check for redundancy is the show mod csm x ft command. But be aware that some slight differences like a real not being in service are sometimes not recognized.

In regards of the SSLModule there is no way as far as I know to sync them. This won't be present in the future in my opinion as there are certificates which require a password or something like that and one won't be able to do redundncy without those passwords. So In my opinion no way to sync two SSL-Module because of security issues.

Kind regards,

Joerg

[robert.breen.hbp2]

My testing has shown that on CSM's running 3.2.1 that the 'sh mod csm X ft' will report configs out-of-sync only if the serverfarms are out of sync. In other words, things such as Reals, VServers, etc can be out of sync and this state will not be reported by the 'sh mod csm X ft' command.

Thanks!