Transparent mode with WCCP v2

[songokudt5]

Hi all.

I config my content engine 7305 with configurations:

CE(config)# wccp version 2

CE(config)# wccp router-list 1 10.10.10.1

CE(config)# wccp web-cache router-list-num 1

And with router:

Router(config)# ip wccp web-cache

Router(config)# interface Serial0

Router(config-if)# ip wccp web-cache redirect out

Address Router: 10.10.10.1/24

Address CE: 10.10.10.2 /24

Client1 connect internet with url: http://www.vnexpress.net

Client2 connect the same URL many times.

But when I use: sho statistic http saving

The hit is a little.(1 hit)

The miss is alot. (49 miss)

So I don't understand the ContentEngine work perfect or not????

Help me, plz

Thanks

[bwestbrook]

You should check to see if your CE and router see each other.

CE "show wccp routers" - you should see the ID of your router you have configured.

Router "show ip wccp web-cache view"

If that doesn't work you can turn on debug

"debug ip wccp packets" and see the request/response sequence

.Jun 16 17:46:26: WCCP-PKT:S00: Received valid Here_I_Am packet from 10.1.1.1 w/rcv_id 00000844

.Jun 16 17:46:26: WCCP-PKT:S00: Sending I_See_You packet to 10.1.1.1 w/ rcv_id 00000845