UDP loadbalancing

[boumrarm]

Hi,

I would like to load balance UDP traffic on 4 IBM-Hosts which are accessed via Frame Relay and X.25 from about 160,000 Terminals. We have about 400 transactions per second. Each transaction consists of 100bytes incoming and 4 Kbytes outgoing. Which CSS11000 can handle such traffic?

Best Regards,

Madjid

UNISYS Germany

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.