Please attach the config. Ideally if you can create two class with URL match. One will match "/EO-SIAS-Client/"
Call this class first and load balance to serverfarm. The second class in under multimatch policy should be "/"
So anything hitting this class will go to redirect and will rewrite the URL to "/EO-SIAS-Client/"
If you reverse the order of the class then it will keep going in the loop.
Let me know if that helps.
Please find the below configuration.
In this configuration iam successfully able do the redirection. I am getting page cannot displyed after selecting other pages
rserver redirect APDRP-REDIRECT
webhost-redirection http://172.24.14.11/EO-SIAS-Client/ 302
rserver host RS_WEB1
description content server web-one
ip address 172.24.7.26
rserver host RS_WEB2
description content server web-two
ip address 172.24.7.27
serverfarm redirect SF_Redirect
serverfarm host SF_WEB
rserver RS_WEB1 8080
rserver RS_WEB2 8080
parameter-map type connection Timeout_Conn
set timeout inactivity 300
class-map match-all VS_WEB
2 match virtual-address 172.24.14.11 tcp eq www
class-map type http loadbalance match-any urlmatch
4 match http url .*/EO-SIAS-Client/
policy-map type loadbalance http first-match PM_LB
policy-map multi-match PM_MULTI_MATCH
loadbalance vip inservice
loadbalance policy PM_LB
loadbalance vip icmp-reply
nat dynamic 1 vlan 52
connection advanced-options Timeout_Conn
As per the below config :
I believe this is the problem. Can you check by taking a wireshark capture to confirm the theory. Ideally if you click on any link you should not get page cannot be displayed.
As per your problem description you want to rewrite
Or Do you have specific URL which you want to rewrite.
Also attach the capture that will help me to understand the issue better.