VIP redundancy

[rmendes]

Hello,

Is it possible in a VIP redundancy configuration to have two IP addresses in the same VLAN, I mean a configuration like follows :

circuit VLAN2

ip address 192.168.100.72 255.255.255.0

ip virtual-router 1 priority 200

ip redundant-vip 1 192.168.100.73

ip critical-service 1 uplink

ip address 10.36.230.102 255.255.255.0

ip virtual-router 10 priority 200

ip redundant-vip 10 10.36.230.101

ip critical-service 10 uplink

Thanks,

Rui

[lisa.hall]

Check out theseTech notes.

http://www.cisco.com/warp/public/117/vip_appguide.html#active

[rbatchu]

Yeb ! its possilbe. My CSS works like that.

[rmendes]

Thanks for the info. Just for my info. what kind of flows are being load balanced?