Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, There is sample in : http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/swwccp.htm Fast Ethernet interfaces 0/2 to 0/5 are connected to the clients and they are configure as :ip wccp web-cache redirect in .A...
I've just upgraded my 11050's to 5.00 build 69.When I look at a "show version", the new version is displayed but the operational and locked flash still list build 33. Anyone else run into this or know what could cause this?Here's the output:B5-CSS-1...
I have a redundant configuration of two CSS 11051 with a crossover cable between them for the failover. The type of redundancy is Box to Box.All works fine except a situation: if you unplug the crossover cable (simulating a fault of one of the two in...
Has anyone load balanced Microsoft Winsock Proxy client? I am trying to load balance internal users using the Winsock client to two MS ISA Servers running Winsock proxy for application access to the internet.
hicustomer claims real time data HTTP doesnt work on cache engine V2.31is it normal , do we need to upgrade to V3.11 in order to support streaming ?thanks for any adviceJYP
Using a scripted keepalive that FINs the TCP connection instead of RSTWorked when I first implemented but has suddenly stoped altogether. When I script play the script works fine. But when I associate the script to a keepalive within a sevice it do...
I have installed CE590 in a client network The http saving performance is from 30 : 40 %My client want to make sure the CE is caching the web site He want to shutdown Serial port of the main router , and try to browse web sites. ( the Cached sites )...
According to the software upgrade documentation for the CSS platform, when the software is upgraded a new script directory is created as "/<current running version>/script", so the document instructs you to copy files from "/oldversion/script" to "/n...
I have configured the CSS in our test lab. I have done a basic configuration. When I go into the Web browser and put in the VIP address, I get nothing displayed. I currently have a CDM pushing data to my CE device. I have my services configure...
My content router is not being recongnized within my CDN Wizard. I have checked my configuration and I have set the defaults twice, and still no luck. Any assistance would be appreciated. I can see my CDM and my CE.ThanksStan
Does anyone know of any good documentation dealing with troubleshooting a cisco content engine? We currently use the ce507 and ce560.I have the PDF from the Cisco documentation website.
I configured a service with a standard keepalive on a RMI server as follows:service SEARCH_AUT_DIH_2 ip address 10.216.71.4 protocol tcp port 2001 keepalive type tcp active The service is certainly up but the CSS consider it down. I think t...
I am trying to use the One-armed transparent proxy config found in the SCA 11000 series manual with the One-Armed config for a CSS 11000 series load balancer. I have one SCA hanging off one CSS, and I'm balancing 3 IIS webservers that are connected ...
I installed Cisco Content Engine 590 on ISP network How can I test the performance of the CE590 ??What is the accepted saving percentage ? sh verCisco Content EngineCopyright (c) 1999-2001 by Cisco Systems, Inc.Cisco Content Engine Software Release 3...
