Dear All,
I will appreciate if someone can quickly clear one issues I have with APPx license. I just purchase one that is meant to enable WAAS feature. But after I activated the DATA license is permanent but WAAS is still showing right to use.
Do we need to purchase another license to enable WAAS?
Going by this information here:
http://www.cisco.com/c/dam/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/appx-license-announcement.pdf
it is expected that once APPX license is enable data license and WAAS feature license should be fully licensed after activation.
#sh license detail WAAS_Express
Feature: WAAS_Express Period left: 8 weeks 3 days
Index: 1 Feature: WAAS_Express Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 5 minutes 27 seconds
Transition date: Dec 01 2015 13:57:50
License Count: Non-Counted
License Priority: Low
Store Index: 4
Store Name: Built-In License Storage
Sur_1941_01#
#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M3, REL EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 06-Dec-11 16:02 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
IKY_1941_01 uptime is 8 weeks, 3 days, 1 hour, 25 minutes
System returned to ROM by reload at 12:18:44 UTC Tue Aug 4 2015
System restarted at 12:20:26 UTC Tue Aug 4 2015
System image file is "flash0:c1900-universalk9-mz.SPA.151-4.M3.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
Processor board ID FGL15512210
6 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
255744K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO1941/K9 FGL15512210
Technology Package License Information for Module:'c1900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
data datak9 Permanent datak9
Configuration register is 0x2102
Your prompt response will be appreciated.
Regards,
