Dear Team,
In WAAS Setup we are not seeing any Optimized EMAPI connection and below error is showing in Alarm section for all Edge WAE devices.
Wansecure encountered a peering service configuration error: ssl peering service configuration mismatch with peer device id 88:f0:31:b3:6e:c8. The following protocol acceleration can fail: SSL-AO, ICA (if using Wansecure) and Encrypted MAPI.
We have verified the SSL peering configuration between Edge and core device and not found found any mismatch between them. Please suggest how we can resolve this issue.
Regards,
Ranjith
Hi,
Try the following on all the WAAS devices participating in the flow. (Core + edge)'
WAAS #sh acc wansecure Accelerator Licensed Config State Operational State ----------- -------- ------------ ----------------- wansecure Yes Enabled Running WAN Secure: Accelerator Config Item Mode Value ----------------------- ---- ------ SSL AO User enabled Secure store User enabled Peer SSL version User default Peer cipher list User configured Peer cert User default <<<<Should be same for all devices Peer cert verify User enabled
Follow the doc below.
http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v501/configuration/guide/cnfg/policy.html#wp1156757
Hope that resolves the issue.
Regards,
Abhishek
CCIES 35269